Pasivo inalámbrico Optex (FTN-RAM)

Marca: Optex
Modelo: FTN-RAM
Disponibilidad: 2
Cantidad: - +
Etiquetas: Outlet

The 'fit' FTN-RAM offers the perfect solution for those outdoor areas where false alarms caused by environmental disturbances and small animals are an issue. The wireless-ready, battery powered version allow installers to save valuable installation time and labor costs because no trenching, installing conduit or pulling wire is required. The FTN-RAM include Anti-Masking feature, a wireless-ready backbox to hold a third party's battery and wireless transmitter, and it comes with a built in bracket that enables horizontal rotation of 190 degrees. It's compact size and flexible detection area allow the sensor to 'fit' into a variety of both residential and commercial applications.



  • Long life battery (Not Included)
  • Selectable 16.4ft. (5m) and 6.6ft. (2m) narrow detection ranges 
  • 190° horizontal rotation with built in mounting bracket 
  • Dual PIR detectors for enhanced pet tollerance
  • Super Multi Dimension Analysis Logic analyzes every motion before signaling an alarm
  • Double Conductive Shielding
  • Intelligent 'AND' logic 

16.5' x 3.3' or 6.7' x 3.3' wireless-ready,compact outdoor dual PIR detector w/Anti-Masking

Product Specifications: 
Detection Method Passive Infrared
PIR Coverage 5 x 1m (16'5" x 3'3")
Detection Length Limit 2 m, 5 m (6'7", 16'5")
Detectable speed 0.3m - 1.5m/s (1' - 4'11"/s)
Sensitivity 2.0°C (at 0.6 m/s) (3.6°F (at 2'/s)
Operation Voltage 2.5 - 10 V DC
Power Input 3 - 9 V DC (Lithium or Alkaline Battery)
Current Draw 10 uA (at standby) / 3mA(max)(at 3 V DC)
Alarm Period 2.0 +/-1.0 sec
Warm-up Period Approx. 120 sec (LED Blinks)
Alarm output N.C./N.O. Selectable -Solid State Switch 10 V DC 0.01 A (max)
Trouble output N.C./N.O. Selectable -Solid State Switch 10 V DC 0.01 A (max)
LED Indicator Enable: During DIP switch (walk test mode) or DIP switch 4 (LED) on / Disable: During Normal Operation / Light/Blink: warm-up, alarm, masking detection (FTN-RAM only)
Operation Temperature -20 - +60°C (-4 - +140°F)
Environmental Humidity 95% (Max)
Weatherproof IP55
Mounting Wall (Indoor/Outdoor)
Mounting Height 0.8 -1.2m (2'7" - 3'11")
Weight 190 g (6.7 oz)
Accessories Connector for power and alarm, connector for trouble, plate nut x 2, screw (M3 x 10MM) x2, screw(3x20mm) x 4, Sponge for transmitter